Digi-Star GT465 - Manual (Page 34)

34 GT465 Operators Manual D3968 Rev A
Setting/
Display
D.A.N Options
( Bold = Default)
Description
MENU 5. CONTROL SETTINGS
Diagnostic Enable
(
DIAG DIAG DIAG DIAG
)
508 ON , OFF
Enables diagnostic information. –
Press SELECT do display DIAG,
then press FUNCTION to display
RPM
RPM Start/Stop
Control
(rssctl rssctl rssctl rssctl)
531 ON,OFF
ON, enables AUTOLOG feature
RPM/Stop Speed
(rssmin rssmin rssmin rssmin)
532 300
Set to 20 – 50% of PTO operating
RPMs. Stop is activated with this
value.
Rpm Start Tol
Speed
(rsstol rsstol rsstol rsstol)
533 100
Set to 10% of PTO operating
RPM’s. Start is activated using the
value + DAN 532.
RPM Start Delay
(rsstoy rsstoy rsstoy rsstoy)
534 3.0
Start activated when RPMs above
DAN 532 + DAN 533 for this time in
seconds.
RPM Stop Delay
(rsspoy rsspoy rsspoy rsspoy)
535 2.0
Stop activated when RPMs below
DAN 532 for this time in seconds.
CALIBRATION
Setup Number
(
SETUP SETUP SETUP SETUP
)
871 Quick entry method selects weigh
method 1-4lbs, 5-8kg, gain 1-9,
display counts 1-9 and capacity
*1000.
Calibration Number
( CAL CAL CAL CAL )
872 Weight displayed at .4mV/V for
these load cells.