Digi-Star GT465 - Manual (Page 33)

D3968 Rev A GT465 Operators Manual 33
Setting/
Display
D.A.N Options
( Bold = Default)
Description
MENU 3. SCALE CALIBRATION SETTINGS
Display Count
( COUNT COUNT COUNT COUNT )
301 .01,.02,.05,.1,.2,.5,
1,2,5, 10 ,20,
50,100
Minimum weight change that is
displayed.
Note: If this is too small, scale will
be unstable.
Display Unit
( LB LB LB LB- -- -KG KG KG KG )
303 LB /KG Unit of measure.
Note: If this changes, calibration
and set-up must change.
Capacity
( CAP CAP CAP CAP )
304 85,000 Maximum capacity of scale.
MENU 4. PRESET, BATCHING & ROTATION COUNTER FEATURES
Relay
( RELAY RELAY RELAY RELAY )
406 OFF , SETPNT,
PRESET,SEEDTD,
PRNOPA, PREACT
Selects behavior for the +12VDC
output.
U-Alarm
(UALARM UALARM UALARM UALARM)
407 1 ,2,3,4 Adjust unload alarm setting
Tolerance Method
(T MTHD)
442 WEIGHT
PERCENT
Tolerance offset method
Tolerance
(TOLER)
442 Manual Entry Set tolerance weight to compensate
for truck overfill
Preset Active
Signal Timeout
(
PAST PAST PAST PAST
)
475 Enter XX:XX Time to continue preset active
signal after preset is reached.
Unload Weight
Display
(
unwedi unwedi unwedi unwedi
)
476 NET, GROSS,
LOAD
NET = From Zero, GROSS =
Display total weight, LOAD =
Unload from preset
Auto Load Preset
(
ALP ALP ALP ALP
)
477 ON , OFF If ON – Load stored preset when
unloading begins.