Digi-Star GT465 - Manual (Page 22)

22
NOTE: For more information on AutoLog, please refer to D3908 AutoLog manual.
1. Press to select required field name. See page 14
2. Press to select required ID. See page 15.
active screen.
3. If AutoLog is functioning, simply start the PTO. Scale will read Zero and enter the net mode.
4. Unload grain from grain cart. The Upper Display
amount left on cart) is displayed on second line of Lower Display.
5. If AutoLog is functioning, simply stop the PTO. Data record will be stored, display
NOTE: If AutoLog is not working
GT465 Operators Manual
Record Data (W/ AutoLog)
: For more information on AutoLog, please refer to D3908 AutoLog manual.
required field name. See page 14
select required ID. See page 15. NOTE: Make sure Indicator has returned to the
og is functioning, simply start the PTO. Scale will read Zero and enter the net mode.
Unload grain from grain cart. The Upper Display shows the amount unloaded. Gross value (tota
amount left on cart) is displayed on second line of Lower Display.
If AutoLog is functioning, simply stop the PTO. Data record will be stored, display
ot working correctly, see page 38 for troubleshooting and setup instructions.
1
2
D3968 Rev A
: For more information on AutoLog, please refer to D3908 AutoLog manual.
: Make sure Indicator has returned to the
og is functioning, simply start the PTO. Scale will read Zero and enter the net mode.
shows the amount unloaded. Gross value (total
If AutoLog is functioning, simply stop the PTO. Data record will be stored, displayed and printed.
for troubleshooting and setup instructions.