DFI BL600-D User Manual
Page 46
46
2
Hardware Installation
Serial ATA Connectors
• BL600-DR
-
Supports up to 6 SATA devices (SATA 0/1/2/3/4/5)
-
SATA speed up to 3Gb/s
-
RAID 0, RAID 1, RAID 0+1 and RAID 5
• BL600-D
-
Supports up to 4 SATA devices (SATA 0/1/4/5)
-
SATA speed up to 3Gb/s
Connecting Serial ATA Cables
Connect one end of the Serial ATA cable to a Serial ATA connector
and the other end to your Serial ATA device.
BIOS Setting
Configure the onboard Serial ATA in the BIOS. Refer to chapter 3
for more information.
Configuring RAID
The system board allows configuring RAID on Serial ATA drives.
Refer to chapter 5 for steps in configuring RAID.
SATA 0 (J17)
SATA 2 (J19)
SATA 1 (J18)
SATA 3 (J20)
SATA 5 (J22)
SATA 4 (J21)