DFI BL600-D - Manual (Page 35)

35
2
Hardware Installation
W
VGA
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the
monitor’s 15-pin D-shell cable connector to the VGA port (Blue)
.
After you plug the monitor’s cable connector into the VGA port,
gently tighten the cable screws to hold the connector in place.
BIOS Setting
Configure the onboard VGA in the Advanced Chipset Features
submenu of the BIOS.
Driver Installation
Install the graphics driver. Refer to chapter 4 for more information.