DFI BL600-D User Manual

Page 45

Text mode
Original mode

Hardware Installation

Floppy Disk Drive Connector

The 90

floppy disk drive connector supports a standard floppy disk

drive. The floppy cable can be inserted into this connector only if pin
1 of the cable is aligned with pin 1 of this connector.

Connecting the Floppy Disk Drive Cable

Install one end of the floppy disk drive cable into the floppy
connector on the system board and the other end-most connector
to the floppy drive. The colored edge of the daisy chained ribbon
cable should align with pin 1 of the floppy connector.

BIOS Setting

Enable or disable this function in the Integrated Peripherals submenu
(“Super IO Device” field) of the BIOS. Refer to chapter 3 for more
information.

This manual is related to the following products:

BL600-DR G7B330-B rev. AE G7B330-B rev. B G7B630-B G7B630-N BL630-D BL630-DR G7B330-BR LT330-B BL330-B BL330-BR G7L331-B G7L331-B-L BL631-D LT600-D LT600-DR LT600-L