DFI SR100-N - Manual (Page 9)

1
9
Introduction
Graphics
LAN
Serial ATA
IDE
Rear Panel I/O
Ports
I/O Connectors
• Internal graphics feature
- Mobile Intel ® Graphics Media Accelerator X3100
- Dynamic Video Memory Technology 4.0
- Microsoft DirectX 9x
- OpenGL 1.5
• Integrated graphics interface
- Analog CRT
- Integrated 300MHz RAMDAC
- Analog monitor supports up to QXGA (2048x1536@60Hz)
- LVDS
- 25MHz-112MHz single/dual channel, TFT panel type support
- Single / dual channel LVDS interface: 2x24 bpp panel
suppor ts up to WUXGA (1920x1200@65Hz) or UXGA
(1600x1200@75Hz)
- DVI (DVI-D signal only)
- DVI 1.0 support for external digital monitor
• Two Realtek RTL8111B PCI Express Gigabit controllers
• Suppor ts 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Three Serial ATA ports, compliant with SATA 1.0a specification
• Data transfer rate up to 3Gb/s
• Supports Advanced Host Controller Interface (AHCI)
• Supports up to two IDE devices
• Supports Ultra ATA 100/66/33
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line out jacks
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 LCD brightness control connector
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 LCD AUX power connector
• 1 DIO connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF connector
• 3 Serial ATA connectors
• 1 40-pin IDE connector
• 1 20-pin ATX power connector
• 1 front panel connector
• 1 chassis open connector
• 2 fan connectors