DFI SR100-N - Manual (Page 77)

77
3
BIOS Setup
PWRON After PWR-Fail
Off When power returns after an AC power failure, the
system’s power is off. You must press the Power but-
ton to power-on the system.
On When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts When power returns after an AC power failure, the
system will return to the state where you left off be-
fore power failure occurs. If the system’s power is off
when AC power failure occurs, it will remain off when
power returns. If the system’s power is on when AC
power failure occurs, the system will power-on when
power returns.
Watch Dog Timer Select
This field is used to select the time interval of the Watchdog timer. If
the system hangs or fails to function, it will reset at the set time
interval so that your system will continue to operate.