Chapter 3, Chapter 3 bios setup – DFI HM101-HM86 User Manual
Page 44
www.dfi .com
44
Chapter 3 BIOS Setup
Chapter 3
Mode of operation of
XHCI Controller.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Confi guration
XHCI Mode
XHCI Pre-Boot Driver
Route USB 2.0 pins to which HC?
Enable USB 3.0 pins
[Manual]
[Enabled]
[Route all Pins to EHCI]
[Disable all Pins]
Chipset
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save and Reset
ESC: Exit
XHCI Pre-Boot Driver
Enables or disables the support of XHCI pre-boot driver.
Route USB 2.0 pins to which HC?
Routes USB 2.0 pins to EHCI or XHCI.
When Manual mode is selected, it will display the following information:
Mode of operation of
XHCI Controller.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Confi guration
XHCI Mode
XHCI Pre-Boot Driver
Route USB 2.0 pins to which HC?
USB 2.0 Pin #0
USB 2.0 Pin #1
USB 2.0 Pin #2
USB 2.0 Pin #3
USB 2.0 Pin #4
USB 2.0 Pin #5
USB 2.0 Pin #6
USB 2.0 Pin #7
USB 2.0 Pin #8
USB 2.0 Pin #9
USB 2.0 Pin #10
USB 2.0 Pin #11
USB 2.0 Pin #12
USB 2.0 Pin #13
Enable USB 3.0 pins
[Manual]
[Enabled]
[Route Pre-Pin]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Route to EHCI]
[Disable all Pins]
Chipset
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save and Reset
ESC: Exit
Mode of operation of
XHCI Controller.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Confi guration
XHCI Mode
XHCI Pre-Boot Driver
Route USB 2.0 pins to which HC?
Enable USB 3.0 pins
USB 3.0 Pin #1
USB 3.0 Pin #2
USB 3.0 Pin #3
USB 3.0 Pin #4
USB 3.0 Pin #5
USB 3.0 Pin #6
[Manual]
[Enabled]
[Route Pre-Pin]
[Select Pre-Pin]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Chipset
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save and Reset
ESC: Exit
Enable USB 3.0 pins
Enables or disables the support of XHCI superspeed.