DFI HM101-HM86 - Manual (Page 15)

www.dfi .com
15
Chapter 2 Hardware Installation
Chapter 2
Panel Power Select
1-2 On: +12V
3-4 On:+5V
5-6 On: +3.3V (default)
1
6 4 2
5 3
JP5 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP5 match the
LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
1
6 4 2
5 3
1
6 4 2
5 3
Backlight Brightness Power Select
JP3 is used to select the power level of backlight brightness control: +12V or +5V.
Important:
Before powering-on the system, make sure that the power settings of JP3 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.
2-3 On: +12V
1-2 On: +5V (default)
1 3 2
1 3 2
JP5
JP3