DFI HM101-HM86 - Manual (Page 27)

www.dfi .com
27
Chapter 2 Hardware Installation
Chapter 2
Ports and Cables Connecting the Module to the Motherboard
Note:
The system board used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The extension module requires two cables, including the LPC cable and the power cable, to
connect to the motherboard for additional COM/Parallel ports via the LPC connector. The illus-
tration of connecting the extension module to the motherboard is shown below.
the LPC connector on the motherboard.
LPC
the extension module connected to the motherboard via the LPC connector.
LPC
USB Power
Cable
LPC
Cable
EXT-6C1PR