DFI CA900-B - Manual (Page 68)

68
3
BIOS Setup
Select which graphics
controller to use as the
primary boot device.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chipset
This section is used to configure the system based on the specific features of the
chipset.
Important:
Setting incorrect field values may cause the system to malfunction.
North Bridge Chipset Configuration
Boots Graphic Adapter Priority [PEG/PCI]
Internal Graphics Mode Select [Enabled, 32MB]
Max TOLUD [36 Bytes]
PEG Port Configuration
PEG Port [Auto]

Video Function Configuration
Chipset
Configure North Bridge
features.
BIOS SETUP UTILITY
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go To Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Main Advanced PCIPnP
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.

North Bridge Configuration

South Bridge Configuration
Boot Security Chipset
North Bridge Configuration