DFI CA900-B - Manual (Page 47)

47
3
BIOS Setup
Hardware Health Configuration
This section is used to configure the hardware monitor function.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
=== Module Board H/W Monitor ===
Current CPU Temperature
+3.3(V)
Vcore
+1.8(V)
DDR3 1.5(V)
Current CPU Fan Speed
CPU Smart Fan Mode Setting
Manual Mode Value
=== Carrier Board H/W Monitor ===
Case Open Detection
Current FAN1 Speed
Current FAN2 Speed
Current FAN3 Speed
+5 V
+12 V
VBAT (V)
Advanced
:40 o C/104 o F
:3.387V
:1.161V
:1.806V
:1.532V
:6072 RPM
[Manual Mode]
[255]
[Disabled]
NA
NA
NA
:5.214 V
:12.403 V
:3.483 V
Current CPU Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
CPU Smart Fan Mode Setting
Configures the fan mode. The options are Manual Mode and PWM Mode. Se-
lect Manual Mode to enter a value in the Manual Mode Value field.
Case Open Detection
Set this field to Enabled to allow the system to alert you of a chassis intru-
sion event.
Configure Fan Mode