DFI CA900-B - Manual (Page 10)

1
10
Introduction
LAN
Serial ATA
IDE
Damage Free
Intelligence
Connectors
BIOS
Temperature
Humidity
Power
Regulatory
PCB
• Intel 82567LM PCI Express Gigabit Ethernet controller
• Integrated 10/100/1000 transceiver
• Supports Full Duplex flow control (IEEE 802.3x)
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports power down / link down power saving
• Supports up to 4 Serial ATA interfaces compliant with SATA
1.0 specification
• SATA speed up to 3Gb/s (SATA 2.0)
• Supports up to 2 IDE devices
• Supports up to Ultra ATA 100
• Bus Master IDE controller (PATA)
• Monitors CPU temperature and overheat alarm
• Monitors CPU fan speed and failure alarm
• COM Express connectors
- Two 220-pin COM Express standard connectors
- Module connector pin: Tyco 3-1827231-6
• 1 CPU fan connector
• SPI BIOS (optional)
• Operating: 0
o C to 60 o C
• Non-operating: -40 o C to 85 o C
• Operating: 10% to 90%
• Input: 12V, 5VSB
• EMC: CE, FCC Part 15 Class B
• Dimensions
- Basic COM Express form factor
- 95mm (3.74”) x 125mm (4.9”)
• Compliance
- PICMG COM Express R1.0 basic form factor, Type 2