DFI CP908-B - Manual (Page 47)

47
3
BIOS Setup
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Restore AC Power Loss
Help.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Super IO Configuration
Super IO Chip
Restore AC Power Loss

Floppy Disk Controller Configuration
Advanced
W83627H
[Power Off]
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system’s power is off. You
must press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically
power-on.
Last State
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system’s power
is off when AC power failure occurs, it will remain off when power returns.
If the system’s power is on when AC power failure occurs, the system will
power-on when power returns.