Devolo MicroLink dLAN Wireless - Manual (Page 20)

Network configuration
|
| devolo MicroLink dLAN Wireless |
20
EN
(German/English) can be toggled by clicking the corresponding flags on the
start page of the configuration interface.
4.2.3 Setup
Admin Password
The password of the configuration interface set up initially by devolo is
admin.
The Admin password is the configuration password. Select a new password
and enter it into both input fields. This ensures that no one can change the
configuration of your MicroLink dLAN Wireless without authorization.
The
password must have at least five characters, and may only consist of letters
and numbers. Should you ever forget your password, you will need to press
the 'Reset' button of the MicroLink dLAN Wireless. However, this will
delete all of your configuration data and you will need to repeat the
configuration procedure. After a reset, the password will be admin again.
Keep in mind that the settings you have configured take effect only if you con-
firm them by clicking Submit and restart the access point.