Delta Dore DFR TYXAL+ - Manual (Page 8)

- 8 -
1. Presentation
2. Location
Locations to avoid
Do not install the detector:
• Within a metre from vents for heating, cooling or circulating air.
The smoke could be blown away from the detector or be diluted.
• In a place where the temperature could drop beneath 0°C or rise above
+50°C;
risk of detector not working correctly.
• In a place where there is a risk of condensation. Bathrooms and laundry
rooms are not recommended.
• Places where smoke could gather (kitchen or poorly ventilated garage)
and cause false alarms.
• In a place that is excessively dusty.
Additional installation recommendations, as well as the "Manda-
tory Performance Declaration" for this equipment are available in
the product fi le for DFR TYXAL+ on our website www.deltadore.com
Material manufactured by SHD BP10809 under reference DFR
TYXAL+.
You must check that your detector is functional once
a month or after each battery change.
Pressing the "test" button on the case for a few
seconds will light up the LED and the detector will
emit 2 beeps.
Do not try to trigger the alarm any other way (using a lighter, etc.) because
you could damage the detector or even start a fi re.
Your detector has been designed to require the minimum maintenance pos-
sible. However, some simple actions need to be performed once a year.
After having removed the detector:
• Clean the cracks in the detector (located on the side) with a vacuum
cleaner, using a soft brush or a vacuum cleaner accessory.
• Use a slightly damp cloth to clean the outside of the case.
Functional check and maintenance:
4
OK
2 1 3
>3s
It is recommended that the detector be replaced after 10 years.
EN
The detector can be associated with a DELTA DORE wireless X3D
alarm and control system.