Dataprobe Serial iBootBar User Manual
Page 12

Page 12
Serial iBootBar v111207e
Command
Description
Access
Fact Def
set logging
Turns on or off event logging
get logging
Gets the current logging setting
set alarms
Turns on of off current alarm reporting
get alarms
Gets current alarm reporting status
get console
Displays the current console configuration, Timeout and Baud Rate
Admin
set console timeout <30-3600/disable>
Console can be set to automatically logout with no activity for 30
seconds to 1 hr in seconds, or disabled.
Admin
120
set console baudrate <2400/4800/9600/19200/38400/
57600/115200>
The baud rate of the serial port. 400,4800,9600,19200
,38400,57600,115200 bps
Admin
115200
set factory defaults
Resets all parameters to their factory settings Confirmation is required.
Note: This command can take up to 30 seconds to execute.
Admin
logout
Ends the session
User
reboot
Reboots the selected iBootBar. This will not change the status of the
outlets.
Admin
Group Commands
Command
Description
Access
Fact Def
get groups
Returns a list of the groups that the current user has rights to.
User
get group
Returns the details of the selected group
User
set group
Controls the selected group
User
add group
Adds a new group. 20 characters max. Up to 8 groups maximum
Admin
set group
Adds or deletes a specific outlet on a specific device from the
selected group.
Admin
ren group
Renames the selected group. 20 characters max.
Admin
del group
Deletes the selected group.
Admin
Firmware Upload Commands
Command
Description
Access
Fact Def
get upload enable
Get or set the ability for the root iBootBar to accept a firmware
Admin