Daktronics DakStats/Stat Crew & Venus 7000 - Manual (Page 4)

DakStats/Stat Crew & Venus 7000 Quick Guide 4 of 5
201 Daktronics Drive PO Box 5128, Brookings, SD 57006
Tel: 605-697-4036 or 888-325-7828 Fax: 605-697-4700
Website: www.daktronics.com
ED-15578 Rev 1
20 August 2009
7. Click Close to exit the Display Page Configuration window.
8. At the top of the window, there will now be a button with the same
name that you entered for the display page. Click the button.
9. Select the Guest and Home teams and the player numbers of each
roster will appear.
10. Below the rosters, right-click one of the empty buttons and select
Edit Cell.
11. Enter a descriptive Script name for the RTD that will be displayed for
the button, and then click OK.
12. Right-click the new button and select Edit Script File.
13. In the Edit Script window, click Add Line.
14. In the Select Scripting Command window, select one of the
following RTD sequence commands:
15. The remaining setup will vary based on the above selection.
Refer to the appropriate section below.
Select the PlaySequence scripting option to display a sequence that
contains RTD scoreboard stats (Input 3).
1. Click Next.
2. Click Select Sign to locate the proper sign on which the sequence
will play, and then click Next.
3. Click Select Path to locate the sequence file to play, and then
click Next.
4. Select a display Mode and then click Next.
5. Confirm the sequence settings are correct, and then click Finish.
Command Action
PlaySequence
Or RTD
PlaySequence
Plays a specified sequence; typically used
for scoreboard feed statistics (Input 3) as
well as non-RTD sequences & animations.
SelectStats Prompts user to choose a team or player,
then plays a specified sequence. Used to
request stats for the requested stats feed
(Input 4).