Daktronics DakStats/Stat Crew & Venus 7000 - Manual (Page 3)

DakStats/Stat Crew & Venus 7000 Quick Guide 3 of 5
201 Daktronics Drive PO Box 5128, Brookings, SD 57006
Tel: 605-697-4036 or 888-325-7828 Fax: 605-697-4700
Website: www.daktronics.com
ED-15578 Rev 1
20 August 2009
6. Click on the Data Field Parameters tab, and use the following
instructions to add RTD fields to the display sequence:
a. Change the Field Type to RTD.
b. Select Input 3 for scoreboard stats or Input 4 for requested stats.
Note: As a general rule, do not insert scoreboard and requested
stats in the same frame.
c. Select an RTD field from the Field Name list.
(Ex: BATTER FULL NAME)
d. Position the RTD field by dragging the outline of the field to the
desired location in the background.
Note: You can only move RTD fields when the Frame Properties
window is open.
7. Insert additional RTD Fields by increasing the Field number and
repeating step 6. Once all desired RTD fields are added, click OK.
8. Go to the first graphic frame of the sequence and delete it (Frame >
Delete).
9. Go to File > Preview (or press [F5]) to preview the sequence.
Note: Stats do not appear for Input 4 unless the user performs a stat
request (refer to the following section).
A Stats Interface Page requests stats for sequences that use Input 4.
Before proceeding, create both a sequence that displays scoreboard stats
(Input 3) and a sequence that displays requested stats (Input 4).
1. From the Venus 7000 Shell program, click Display.
2. Go to View > Configure Pages.
3. Select an empty slot and then click Add New Page.
4. Type in a
descriptive name for
the page and then
click OK.
5. On the display page
properties window,
select Interface as
the Page Type.
Note: For
scoreboard stats,
select Quick
Display instead.
6. Enter the other
appropriate settings for the Stats Interface Page and click OK.