Denon AVR-1910 - Manual (Page 38)

Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Making the input settings (Input Setup)
Setting items Setting contents
Decode Mode
Set the input source’s
decoding mode. Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This can be set for input sources for which “HDMI” or “Digital” is
assigned at “Assign” (vpage 33).
• Normally set this to “Auto”.
Setting items Setting contents
Rename
Change the input source’s
display name to the desired
name. 1. Use o p to set the cursor to the character you want to change.
2. Use ui to change the character, then press .
Up to 8 characters can be input.
The input character type can be switched by pressing while the
display name is being changed.
• The types of characters that can be input are as shown below.
G Capital lettersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
G Small lettersH abcdefghijklmnopqrstuvwxyz
G SymbolsH ’ ( ) b + – . / : ; < = > ? [ ]
G NumbersH 0123456789 (space)
•
•
Default
The changed display names
are reset to the defaults. Yes : Reset to the defaults.
No : Do not reset to the defaults.
Changing the Input Source’s Display Name (Rename)
Default settings are underlined.
Setting items Setting contents
Repeat
Make settings for repeat
mode. All : Repeat all songs.
One : Repeat the current song.
OFF : Cancel repeat mode.
Shuffle
Make settings for shuffle
mode. n When DENON control dock for iPod ASD-1R or ASD-11R is
connected
Songs : Shuffle all songs.
Albums : Shuffle songs from current album only.
OFF : Cancel shuffle mode.
This can be selected for input sources for which “Assign” is assigned at the “iPod Dock” (vpage
33) setting.
Setting the iPod Playback Mode (iPod Playback Mode)
Default settings are underlined.
Use this procedure to change the display name of the currently selected input source.
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Setting items Setting contents
Source Level (Analog)
Correct the playback level of
the analog audio input. –12dB ~ +12dB (0dB)
Source Level (Digital)
Correct the playback level of
the digital audio input. –12dB ~ +12dB (0dB)
Use this procedure to correct the playback level of the currently selected input source's audio input.
Set this if there are differences in the input volume levels between the different sources. The analog
input level and digital input level can be corrected separately.
Correcting the Input Source’s Playback Level
(Source Level)
Default settings are underlined.
Set
tings