Daktronics G-100-7.6-R - Manual (Page 12)

Note: Hanging the display without using the supplied eye bolts will negate the
warranty. Attaching or hanging anything from the display will render the warranty
null and void.
Mechanical Installation 2-2
2.3.2 Wall Mount
Reference Drawings: Shop Dwg, G-***-2-7x***-2.1 ........... Drawing A-94764
Figure 1: Eye Bolt
Insertion
Shop Dwg, G-***-3-7x***-2.1 ........... Drawing A-94765
Shop Dwg, G-***-4-7x***-2.1 ........... Drawing A-94766
Shop Dwg, G-***-5-7x***-2.1 ........... Drawing A-94767
Shop Dwg, G-***-6-7x***-2.1 ........... Drawing A-94768
Mtg Methods, G-***-*-7x***-2.1 ....... Drawing A-95540
The multi-line has holes on the back of the display for the attachment of the wall
mounting clips. Using the #8-32 screws provided with the display, attach the
mounting clips to the rear of the display as shown (refer to Figures 2 and 3). Use all
the supplied clips.
Figure 2: Wall Mounting Clip Attachment Figure 3: Mounting Clip Placement; Rear
View
1. Mount the wall bracket to the wall where the display is to be located. Refer to the
referenced shop drawings for your model of display to determine the location of
the bracket with respect to the display. Be sure the bracket is mounted to
sufficiently support the weight of the display. Have all mountings inspected by a
qualified structural engineer.
2. Set the display on the wall mounted bracket. The bracket fits onto the wall
mounting clips as shown in the reference drawings.