Daktronics Single-Section Outdoor LED Scoreboards - Manual (Page 7)

Introduction 1
Section 1: Introduction
This manual explains the troubleshooting of single-section outdoor scoreboards. For additional
information regarding the safety, installation, operation, or service of this system, refer to the
telephone numbers listed in Section 4. This manual is not specific to a particular installation. Project-
specific information takes precedence over any other general information found in this manual.
IMPORTANT SAFEGUARDS:
 Please read and understand all instructions before servicing the scoreboard.
 Do not drop control equipment or allow it to get wet.
 Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void.
 Disconnect display power when not in use or when servicing.
 Disconnect display power before servicing power supplies to avoid electrical shock.
Power supplies run on high voltage and may cause physical injury if touched while
powered.
 Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
1.1 Specifications Label
Power specifications as well as serial and model number information can be found on an ID
label on the display, similar to the one shown in Figure 1.
Please have the assembly number, model number, and the date manufactured on hand when
calling Daktronics customer service to ensure the request is serviced as quickly as possible.
Knowing the facility name and/or job number will also be helpful. Note that the Product
Number(s) are sometimes used to distinguish different generations of the scoreboards having
the same model number.
Figure 1: Specifications Label
0A-1192-2000 HRev: 00
SN: 1001
05/15/13
3219728 0001
BA-515-11
VOLTS: 120V AC
AMPS: 1.25
WATTS: 150
Product Number Model Number