Delfield STD4532N - Manual

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior top is one-piece, 22-gauge stainless steel with
integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge galvanized
steel.
Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelves
supported on plugs. Interior back is one-piece 22-gauge
stainless steel. Interior bottoms are thermofoamed ABS
plastic. Base is fully insulated with high-density foamed in
place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
are located on the interior rear wall of the cabinet. Refrigerant
flow is controlled by a capillary tube. Cabinet maintains an
interior cabinet temperature of 0°F to 10°F (-18°C to -12°C).
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters Equipment is mounted on 2” (5.08cm) (2.5” ride
height), diameter plate casters with front two locking.
Door has a 24-gauge stainless steel exterior, with thermoformed
ABS plastic interior liner.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer holds two full size 12”
x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pans. Bottom
drawer holds one full size 12 x 20" and three 1/6 size 4" deep
pans. Pans are supplied by others.
Specifications
Standard Features Options &
Accessories
100% front breathing, which allows the unit to be
pushed against a wall or built into a cabinet or an
existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides).
ABS is extremely durable - it won’t dent, chip or
corrode and is backed by a limited lifetime warranty
Heavy duty self-closing hinges
“ST” prefix models have a 4” stainless steel backsplash
“D” prefix models feature Delfield’s exclusive new
drawer system. Drawers are backed by a 10-year
warranty on the track assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane keeps energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and
installation
60-cycle single phase electrical system
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per
door section
ACT solid state electronic control
One year parts and 90 day labor standard warranty. •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ST4532N Single section freezer with doors
STD4532N Single section freezer with drawers
•
•
Models
ST4532N Flat Top
Front-Breathing Self-Contained Compact Flat Top Freezers
ST
45
32
N
Fla
t T
op
Fro
nt-
Bre
ath
in
g S
elf-
Co
nta
in
ed
C
om
pa
ct F
lat
To
p F
ree
ze
rs
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Interior lights
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
alter electrical specifications
of the unit.
•
•
•
•
•
•
•
•
•
•
ST4532N