Cybex 20040 Eagle NX Leg Press User Manual
Page 16
Cybex Owner’s Manual
16
Install cable
1. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight.
Install spiral pin connecting cable assembly to top weight.
1
2
Description
1 Top weight cover
2 Spiral pin
2. Verify the cable is moving smoothly.
3. Install back panel.
4. Remove ten screws securing top covers (front and back) to frame using a Phillips
screwdriver.
1
2
4
2
3
1
Description
1 10-32 screw (8)
2 # 8 screw (2)
3 Top cover (2)
4 Back panel
Verify proper operation
This manual is related to the following products:
- 20050 Eagle NX Leg Extension 20060 Eagle NX Seated Leg Curl 20120 Eagle NX Calf 20090 Eagle NX Abdominal 20070 Eagle NX Arm Curl 20030 Eagle NX Row 20130 Eagle NX Pulldown 20010 Eagle NX Overhead Press 20000 Eagle NX Chest Press 20080 Eagle NX Arm Extension 20190 Eagle NX Hip Torso 20100 Eagle NX Back Extension 20170 Eagle NX Glute 20180 Eagle NX Hip AB-AD