Wrong, Correct – Cybex 20040 Eagle NX Leg Press User Manual
Page 13
Cybex Owner’s Manual
13
Separate Frame
1. Remove four bolts, four locknut, and two connectors securing two halves of the frame using a
7/32” Allen wrench and 9/16” wrench.
1
2
3
Description
1 Bolt (4)
2 Connector (2)
3 Locknut (4)
2. Move each half through the doorway to the desired location.
Assemble Frame
1. Place the two halves of the frame together.
2. Secure the two halves of frame with four bolts, four locknut, and two connectors, using a
7/32” Allen wrench and 9/16” wrench.
Install weight plates
1. Lean guide rods slightly outward, away from machine, DO NOT put excessive pressure on
guide rods, it will damage lower guide rod caps.
2. Wipe the entire length of the guide rods with a clean cloth.
3. Lubricate the guide rods with a light coating of medium weight oil.
4. Install each weight plate, one at a time, so wide edge of bushing faces upward and narrow
edge of bushing faces downward.
NARROW
bushing edge
WRONG
WIDE bushing
edge faces
upward
CORRECT
5. Slide top weight onto guide rods.
- 20050 Eagle NX Leg Extension 20060 Eagle NX Seated Leg Curl 20120 Eagle NX Calf 20090 Eagle NX Abdominal 20070 Eagle NX Arm Curl 20030 Eagle NX Row 20130 Eagle NX Pulldown 20010 Eagle NX Overhead Press 20000 Eagle NX Chest Press 20080 Eagle NX Arm Extension 20190 Eagle NX Hip Torso 20100 Eagle NX Back Extension 20170 Eagle NX Glute 20180 Eagle NX Hip AB-AD