Cybex 20040 Eagle NX Leg Press User Manual
Page 12
Cybex Owner’s Manual
12
4. Repeat above step for opposite guide rod.
5. Lean guide rods slightly outward, away from machine. DO NOT put excessive pressure on
guide rods, it will damage lower guide rod caps.
6. Slide top weight up and out of the machine and set aside.
7. Remove weight plates and set aside for reinstallation later.
Remove Guard Plate
1. Remove three Phillips head screws securing guard plate to frame using a Phillips
screwdriver.
1
2
3
Description
1 Phillips head screw (3)
2 Frame
3 Guard plate
Remove Cam Assembly
1. Turn cam assembly to gain access to the weight cable and clamp.
2. Twist the clamp to open and pull cable end from cam notch.
1
2
3
Description
1 Cable
2 Clamp
3 Cam notch
3. Repeat above procedure for seat cable.
4. Remove two BHSCS from cam assembly using two 5/16” Allen wrenches.
1
1
2
Description
1 BHSCS
2 Cam assembly
5. Remove cam assembly from frame assembly.
- 20050 Eagle NX Leg Extension 20060 Eagle NX Seated Leg Curl 20120 Eagle NX Calf 20090 Eagle NX Abdominal 20070 Eagle NX Arm Curl 20030 Eagle NX Row 20130 Eagle NX Pulldown 20010 Eagle NX Overhead Press 20000 Eagle NX Chest Press 20080 Eagle NX Arm Extension 20190 Eagle NX Hip Torso 20100 Eagle NX Back Extension 20170 Eagle NX Glute 20180 Eagle NX Hip AB-AD