Cybex 770C Cycle Cybex GO - Manual (Page 44)

Cybex Owner’s Manual
44
Quick Operation Guide
Maximum user weight is 400 lbs. (181 kg).
The following is a quick overview of the operation of the unit. For more information read Detailed
Operation Guide in this chapter.
1. Verify pedals are completely stopped.
2. Grasp handrails and step carefully into pedals. Begin pedaling.
3. Tap QUICK START on the CardioTouch screen.
4. Tap the Weight icon to select weight.
5. Tap the keypad to enter user weight.
6. Press the ENTER icon to complete weight input.
7. Press the Gear/Power/RPM + – keys to change the Gear/Power/RPM at any time.
8. Press the Stop key at any time to end workout. “Workout Review” is displayed.
Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
Skip step 1 if unit is not equipped with a power cord.
1. Plug the E3 View monitor power cord or optional power cord into a power outlet from a
grounded circuit, See Electrical Requirements. Coil up the remainder of the power cord and
place it out of the way. The control panel will light up and be in the Dormant Mode.
2. Verify pedals are completely stopped.
3. Grasp handrails and step carefully into pedals. Begin pedaling.
4. Select Quick Start or Workouts.