Cybex 770C Cycle Cybex GO - Manual (Page 31)

Cybex Owner’s Manual
31
If scan was previously configured and stored, choose Download Configuration and tap NEXT to
configure other units. Go to Test Cybex GO Monitor.
1 2
3
Description
1 Analog/Digital Cable
2 Download Configuration
3 NEXT
2. Tap SAVE CONFIGURATION TO SERVER.
1
Description
1 SAVE CONFIGURATION
TO SERVER
To configure each of the channels see Channel configuration.
3. Tap FINISH to complete installation. Cybex GO monitor will reset. Do not call Netpulse.