Cybex 770C Cycle Cybex GO User Manual
Page 32
Cybex Owner’s Manual
32
Channel configuration
Each channels name, position, and icon can be edited. Channels not needed or channels with poor
signals can be disabled.
1
2
4
3
5
Description
1
Channel Up/Channel Down
2
Channel name and position
number
3
SAVE CONFIGURATION
TO SERVER
4
EDIT NAME, EDIT
POSITION, and EDIT ICON
5
Channel ENABLED or
DISABLED
1. Tap SHOW ADVANCED SETUP, if edit icons are not visable.
2. Tap the Channel Up or Channel Down icons to select channel to edit.
3. Tap EDIT NAME. A keyboard is displayed to edit the channel name. Tap SAVE when done.
4. Tap EDIT POSITION. A keypad is displayed to edit the channel position. Tap SAVE when
done.
5. Tap EDIT ICON. Icons are displayed to edit the channels icon. Tap SAVE when done.
6. Tap the ENABLED or DISABLED icon to toggle the viewing of each channel.
The channel configuration only needs to be performed on the first unit installed. Configure the first
unit completely, save the configuration, then assemble and configure all other units.
Test Cybex GO monitor
Test Cybex GO monitor by tapping
CONTINUE AS GUEST at home screen. Select from TV or Videos
to test Cybex GO monitor