Cybex 360A Arc Trainer - Manual (Page 7)

www.cybexinternational.com 7
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PROVIDER IF YOU ARE IN DOUBT AS TO WHETHER THE
UNIT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF THE PLUG WILL NOT
FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
The Home Arc Trainer can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes,
surges and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of damage, always use a surge protector (not included) with your unit.
This Home Arc Trainer must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the Home Arc Trainer malfunction. This unit comes with an electrical cord having an equipment-grounding
conductor and a grounding plug.
This Home Arc Trainer is for use on a nominal 115 VAC +/- 5%, 50/60 Hz and 15 amps; or 230
VAC +/- 10%, 50/60 Hz and 10 amps.
Product Spec:
Product dimensions : L70.7 x W28.5 x H62.3 INCH
Product weight: 300 LBS (135KGS).
Power required : 110VAC or 220VAC
NOTE: Before plugging the power cord into an electrical outlet, verify that
the voltage requirements for your area match the voltage of the unit that
you received.
Continental Europe
CEE 7 / 7
16A / 230V / 50Hz North America
NEMA5-15
15A / 120V / 60Hz Australia / New Zealand
AS/NZS 3122
10A / 230V / 50Hz United Kingdom / Ireland
BS 1363
13A / 230V / 50Hz