Contemporary Control Systems AI-SRVR Servers to Ethernet User Manual - Manual (Page 11)

TD000200-0MC
11
4.2 AI-SRVR Function
4.2.1 AI-SRVR Statistics Screen (Read Only)
When the AI-SRVR Function is initially invoked, the default AI-SRVR Statistics screen of
Figure 6 appears
— presenting information in 8 data fields.
Figure 6 — AI-SRVR Statistics Screen (Read Only)
On the left side of the screen, 5 ETHERNET fields are reported:
IP Address reports the currently assigned IP Address of the AI-SRVR.
Clients lists how many Ethernet clients are connected to the AI-SRVR. Accessing the
unit by web browser temporarily increases this count by one.
RX Packets counts the number of Ethernet packets received by the AI-SRVR.
TX Packets counts the number of Ethernet packets transmitted by the AI-SRVR.
Server Status identifies the AI-SRVR status. If the AI-SRVR software is running the unit
should be ONLINE, otherwise the software is inactive. This could occur
during Telnet access if config-srvr is run while AI-PROXY is active.
Executing config-proxy would then confirm that AI-PROXY is ONLINE.
On the right side of the screen, 3 ARCNET values are reported:
Node ID reports the currently assigned ARCNET node ID of the AI-SRVR.
RX Packets counts the number of ARCNET packets received by the AI-SRVR.
TX Packets counts the number of ARCNET packets transmitted by the AI-SRVR.