Comtech EF Data VIPERSAT File Streamer v1.2.x - Manual (Page 32)

Main Window Description
3-4 VFS User Guide
The buttons are context-sensitive and only active when appropriate. Inactive
buttons appear as grayed-out shadow icons.
Status Bar
Appearing at the bottom of the main window, the Status Bar indicates the
current state of the VFS Gateway and whether or not VFS is enabled.
If the Gateway IP Address is detected by VFS and is found to be a VFS-enabled
modem, the modem’s role—Hub or Remote—will be displayed in the status bar.
File transfers can occur with this status.
When the gateway modem role is Hub, dSCPC will show as Disabled since
no switching is required; data is transferred using the TDM outbound
channel.
When the gateway modem role is Remote, dSCPC will show as Enabled
since switching is required.
If the Gateway IP Address is not detected by VFS or is not found to be a VFS-
enabled modem, the status bar will display VFS Disabled / Cannot reach proxy
or Not connected. File transfers can not occur with this status.
View Area
The View Area of the main window displays a listing of existing sessions,
event log entries, and file transfer progress activity, depending on the current
view mode.
Clicking on an existing session that appears in the view area will select that
session and allow a command, such as Edit Session or Delete Session, to be
executed on that selection.