beautypg.com

Comtech EF Data SkyWire Quick Start Procedure User Manual

Page 7

background image

AN213 - Rev. 1.3
Skywire Quick Start Guide

7

4.2 Demodulator Configuration


There are up to four demodulators that may be installed in the SkyWire Gateway. To configure
any of the installed demodulators, select the corresponding demod tab and click on the Enable
button. Then select the carrier and bandwidth as you would a normal SCPC modem.
See Figure 4-4 for Example Settings.

Once satisfied with the new settings, click on the Apply button to have them take effect.

Repeat the above process for all the demodulators that are installed in the SkyWire Gateway.

Figure 4-4 Demodulator 1 Tab Edit Mode



See also other documents in the category Comtech EF Data Equipment: