beautypg.com

Comtech EF Data SkyWire Quick Start Procedure User Manual

Page 6

background image

AN213 - Rev. 1.3
Skywire Quick Start Guide

6

4.1 Modulator Configuration


To setup the modulator, simply enable the transmitter and select the carrier and bandwidth as
you would a normal SCPC modem. See Figure 4-3 for Example Settings.

Once satisfied with the new settings, click on the Apply button to have them take effect.

The Gateway Identification number, this is unique to every product and
will be used later during network configuration.


Figure 4-3 Modulator Tab Edit Mode