Comtech EF Data SkyWire Quick Start Procedure - Manual (Page 11)

AN213 - Rev. 1.3
Skywire Quick Start Guide
11
5.0 SkyWire Network Configuration
From the main menu, select Network Configuration and click on an installed demodulator. If only
one demodulator is installed, click on “Demod1” selection. The following window will appear.
Figure 5-1 Network Configuration – Brand New Network
To configure the local SkyWire Gateway to join the network as remote 1 for example, click on the
“Create” button to the left of remote 1 then click on the “Edit” button.
Figure 5-2 Remote Network Configuration