Comtech EF Data DST - Manual (Page 49)

Digital Satellite Terminal System Revision 1
Low Noise Block Converter MN/DST.IOM
4–7
4.4 LNB Installation
4.4.1 LNB Tooling
Refer to Figure 4-1.
1/2-inch Box Wrench (or adjustable)
5/16-inch Box Wrench (or adjustable)
7/16-inch Box Wrench (or adjustable)
7/64-inch SAE Allen
M3 Metric Allen Wrench
Screw Driver Phillips
4.4.2 C-Band
Table 4-3. Selection of LNB to OMT
LNB Part No. LNB
Description
Comment
RF/LNB3.6-4.2FE
LNB, EXT REF Type F Connector.
RF/LNB3.6-4.2F03
LNB, 3 ppm INT REF Type F Connector.
4.4.3 Ku-Band
Table 4-4. Selection of LNB to OMT
LNB Part No. LNB
Description
Comment
RF/LNB-10.9-11.7
RF/LNB-11.7-12.2
RF/LNB-12.2-12.7 LNB, EXT REF Type N Connector. For Spares
or use with SDM-300L2 and
other modems with Type N RF
receive connector.
RF/LNB10.9-11.7FE
RF/LNB11.7-12.2FE
RF/LNB12.2-12.7FE LNB, EXT REF Type F Connector. Use with
SDM-300L3 / CiM-300L and
other modems with Type F RF
receove connector.
RF/LNB10.9-11.7F03
RF/LNB11.7-12.2F03
RF/LNB12.2-12.7F03 LNB, 3 ppm INT REF Type F Connector. Use with
SDM-300L3 / CiM-300L and
other modems with Type F RF
receive connectors.