Comtech EF Data DST - Manual (Page 27)

Digital Satellite Terminal System Revision 2
Installation MN/DST.IOM
2–3
2.2.2 Mounting Kit
Table 2-2. Optional: Mounting Kit, KT/6228-1 (IDU to Rack)
QTY Part Number Description
2 FP/6138-1 Bracket, Rear Support
4 HW/10-32x1/2RK Bolt, #10 Rack
2 HW/10-32X1/4 SHC Screw, Socket 10-32 x 1/4inch
2.3 Installation
2.3.1 IDU Installation
Tools Required:
Screw Driver Phillips
5/32-inch
SAE Allen Wrench
Refer to Figure 2-1. Use mounting kit KT/6228-1.
1. Install the IDU rear support brackets as follows:
a. Install provided rear support bracket onto the mounting rail of the rack.
Fasten with provided bracket bolts.
b. Fasten the provided #10 socket head screws to the rear-side mounting holes
on either side of the chassis modem. Mount the modem into the equipment
rack ensuring that the socket heads engage into the slots of the rear support
brackets.
Note: It may be necessary to adjust the location of the rear mounting rails of
the rack.
c. Refer to Chapter 3 prior to connecting.