Comtech EF Data CRS-170 - Manual (Page 8)

CRS-170 1:1 Redundancy Switch Revision 1
Installation and Operations Manual MN/CRS170.IOM
10
R
EPORTING
C
OMMENTS OR
S
UGGESTIONS
C
ONCERNING THIS
M
ANUAL
Comments and suggestions regarding the content and design of this manual will be
appreciated. To submit comments, please contact the Comtech EF Data Customer
Support Department.
EMC C
OMPLIANCE
This is a Class B product. In a domestic environment, it may cause radio interference that
requires the user to take adequate protection measures.
EN55022 C
OMPLIANCE
This equipment meets the radio disturbance characteristic specifications for information
technology equipment as defined in EN55022.
EN50082-1 C
OMPLIANCE
This equipment meets the electromagnetic compatibility/generic immunity standard as
defined in EN50082-1.
In order that the CRS-170 continues to comply with these standards, observe the
following instructions:
Connections to the transmit and receive IF ports (BNC female connectors) should be
made using a good quality coaxial cable; for example, RG58/U (50 Ω) or RG59/U
(75 Ω).
All 'D' type connectors attached to the unit must have back-shells that provide
continuous metallic shielding. Cable with a continuous outer shield (either foil or
braid, or both) must be used, and the shield must be bonded to the back-shell.
The equipment must be operated with its cover on at all times. If it becomes
necessary to remove the cover, the user should ensure that the cover is correctly
re-fitted before normal operation commences.
F
EDERAL
C
OMMUNICATIONS
C
OMMISSION
(FCC)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.