Code CR3600 - Manual (Page 7)

D013597_02_CR3600_User_Manual
Fuel Gauge Button
5.0 - Fuel Gauge Battery Status Indicators
Check the Battery Life
Press the fuel gauge button (Figure 11) to determine remaining battery life. If the battery has less then 10% capacity, the first LED will
flash rapidly. For 25% or greater capacity, the LEDs will flash ON for 4 seconds.
3
Fuel Gauge Status Indicator While Charging
If the battery has less then 10% capacity, the first LED will flash rapidly while charging. For 25% or greater capacity, the LEDs will flash
ON for 4 seconds.
Fuel Gauge Indicators
6.0 - Powering On/Off the Reader
Press and hold either button located on the right or left of the arrow keys, or the trigger on handled configurations (Figures 12 and 13),
for one second, to power on reader. The CR3600 will beep, vibrate and the LEDs will flash to indicate it is on and ready for use.
Battery Life Fuel Gauge Indicators
<10% (Flashes Rapidly)
<25%
25-50%
50-75%
75%+
Figure 11
Figure 13
Figure 12
Figure 13
7.0 - Targeting the CR3600
Make sure the CR3600 screen is at the Ready prompt, hold the CR3600 4-8 inches away from the barcode and press one of the
power/scan buttons or the trigger (Figure 14). The CR3600 will display data from the scanned barcode on its screen. (Figure 4)
The CR3600 will beep, vibrate and the good read indicator (Figure 19) will flash green
to indicate a ‘good read’ has occurred.
Figure 14