Code CR3600 - Manual (Page 13)

D013597_02_CR3600_User_Manual
9
2. Plug the USB connector into the USB port on the computer, or RS232 (Serial) cable to a serial port on the computer. Once plugged
in, the modem’s blue LED light will flash (Figure 32).
17.0 - Attaching the CodeXML® M3 Modem
1. Attach the 8-pin DIN end of the USB or RS232 cable provided to the CodeXML® M3 Modem (Figure 32).
USB Cable RS232 Cable Figure 32
USB Cable
RS232 Cable
16.0 - Batch Mode Indicators
When the CR3600 is in batch/storage mode, a storage icon will appear to indicate the range of storage space that has been used.
Transferring and Deleting Data
There are three different codes to transfer and delete data in memory.
• Transfer All Data in Memory - This will send all data in memory every time the barcode is scanned.
• Transfer Only Unsent Data in Memory - This will send only the data in memory that hasn’t already been sent when the barcode
is scanned (only in batch modes).
• Delete Scanned Data from Memory - Scanning this barcode will erase all data in the reader’s memory.
Batch Mode Disable - Default Reboot Batch Mode Enable - Log Only Batch Mode Enable - Send and Log
USB Keyboard Mode
(Batch Mode Only)
Batch Mode Disable - Transfer
All Data in Memory
Batch Mode Disable - Transfer Only
Unsent Data in Memory