Code CR3600 - Manual (Page 5)

D013597_02_CR3600_User_Manual
1.0 - Unpacking
Remove the CR3600 from its packing and inspect it for damage. If the reader was damaged during shipping, please contact Code.
1
Based on the kit purchased, a combination of the following components will be included with the CR3600 reader:
Charging Station with
Embedded CodeXML® Modem
Charging Station USB Cable Power Supply CodeXML® M3 Modem
with USB or RS232 cable Battery
Weighted
Base Plate
Screws Rubber Feet
2.0 - Charging Station Assembly Instructions
1. Plug the barrel side of the USB charge cable or power supply (depending on which you ordered) into the charger. (Figure 1)
2. (Optional) Attach the weighted base. Place the ‘This Side Down’ (Figure 2) side of the weighted base onto the surface, and place the
Charging Station on top of it and secure with the screws provided. (Figure 3)
Figure 1 Figure 2 Figure 3
3. Rubber feet can be placed on the corners of the weighted base (Figure 4) or directly onto the Charging Station (Figure 5) to
prevent slipping from a surface.
4. (Optional) Mounting the Charging Station to a Surface. Place the ‘This Side Down’ (Figure 2) side of the weighted base onto the
surface, and secure with screws. Note: Because surface types differ, screws are not included to mount a Charging Station to a
surface.
Figure 4 Figure 5