Code CR3600 - Manual (Page 21)

D013597_02_CR3600_User_Manual
26.0 - Reader ID and Firmware Version
17
Reader ID and Firmware
iVVVVWWWWXXXXSSSSSSSSSSAOODYYYYHHIIIIJJJJKKKKLLLLZ…Z
To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the
following code:
You will see a text string indicating your firmware version and CR3600 ID number (see below):
i indicates ‘I’ string output;
VVVV is the application firmware version number;
WWWW is the core application firmware version number;
XXXX is reserved for the radio firmware version number;
SSSSSSSSSS is the Reader’s serial number (ten digits);
A is the current execution state:
OO is the OEM identifier;
D is the display type:
YYYY is the flash file system version number. Reserved;
HH is the hardware revision;
IIII is the hardware type identifier: 0010 indicates a CR3600
JJJJ is the boot application version;
KKKK is the operating system kernel version;
LLLL is the root file-system version;
is the ASCII TAB character;
Z…Z is the decoder version: a null terminated string of printable ASCII characters. Without a decoder.ini file, the order of the
decoders listed here indicates the order of use.
Example: Xap/i3000300006040010002363A06D-CD+SQ
Note: Code will periodically release new firmware for CR3600 readers. For information on latest firmware versions, call Code
at (801) 495-2200. To upgrade firmware, please visit our website at http://www.codecorp.com/codesupport.php and follow
instructions provided.
“A” means core is running
“0” or “N” is no display device
“D” is the standard Keypad/Display