0 - initial pairing instructions for bluetooth, Connection to windows 8 – Code CR2300 Bluetooth Connection User Manual
Page 6

6
D020625_02 Bluetooth Connection Integration Guide
A Bluetooth dongle may be needed if it is not built into the host device.
1. From the Start screen, select ‘Settings’ then select
‘Change PC settings.’
Note: To bring up the settings menu, press the Windows and C keys
simultaneously on the keyboard. If using a mouse, hover the mouse
in the top-right corner. Tablet or PC users with a touch screen, swipe
your finger inward from the top right corner.
2. Scan the following barcode to enable your reader to be
discoverable by Windows 8:
Bluetooth
Discoverable
Mode
Note: Once the reader is in discoverable mode, it will beep 2 times. You
will have 30 seconds to initiate connection to host device. If 30 seconds
elapses without connecting to host device, scan the discoverable mode
barcode again.
3. Select ‘Devices’ and then select ‘Add a Device.’
4. Your Code reader will appear as a device option on the ‘Devices’
window. Select the Code CR2600 device.
Note: The Code CR2600 will be the only reader listed for selection once
the Discoverable Mode barcode is scanned. Users of the CR2300/CR3600
should also select the CR2600 device for connection.
5. Once the Code CR2600 device has been selected, a screen will appear
containing a PIN (Passcode). Windows 8 will occasionally provide an entry
box for users to create their own passcode; enter the numeric passcode of
your choice.
6. When the reader beeps 2 times, it is ready for passcode entry. Using
the PIN Reference Barcodes (located on page 6), scan each of the pass-
code digits with your reader. You will have 30 seconds to enter the pass-
code. Scan ‘Submit PIN’ when the passcode sequence has been entered.
7. The Code CR2600 will appear as a device if the passcode has been
entered correctly.
6.0 - Initial Pairing Instructions for Bluetooth
®
Connection to Windows 8