0 - initial pairing instructions for bluetooth, Connection to windows – Code CR2300 Bluetooth Connection User Manual
Page 5
5
D020625_02 Bluetooth Connection Integration Guide
A Bluetooth dongle may be needed if it is not built into the host device.
1. Find and select the Bluetooth icon in lower right notification tray.
2. Right-click on the Bluetooth icon. Select ‘Add a Device’
from the list of options.
3. Scan the following barcode to enable your reader to be
discoverable by Windows 7:
Bluetooth
Discoverable
Mode
Note: Once the reader is in discoverable mode, it will beep 2 times. You
will have 30 seconds to initiate connection to host device. If 30 seconds
elapses without connecting to host device, repeat steps 1-3.
4. The Code reader will appear as a device option in the ‘Add a Device’
window. Select the Code CR2600 device.
Note: The Code CR2600 will be the only reader listed for selection once
the Discoverable Mode barcode is scanned. Users of the CR2300/CR3600
should also select the Code CR2600 device for connection.
5. Once the CR2600 device has been selected, a screen will appear
containing a PIN.
6. When the reader beeps 2 times, it is ready for PIN entry. Using the PIN
Number Reference Barcodes (located on page 6), scan each of the PIN
digits with your reader. You will have 30 seconds to enter the PIN. Scan
the ‘Submit PIN’ barcode when the PIN sequence has been entered.
Note: Failure to complete PIN entry within 30 seconds will result in a
‘Try Again’ notification button. Press the button and repeat steps 3-6.
7. Once the installation of the reader driver is completed, a ‘this device
has been successfully added to this computer’ window will appear.
8. Reader will beep once and the wireless icon LED will remain solid
when successfully connected.
9. To test connection, open ‘notepad’ and scan barcodes. If data
appears on notepad after each scan, you have successful connected
to Windows 7. If notepad is not showing scanned data, remove the
BT device from the Bluetooth device screen and repeat steps 1-7.
5.0 - Initial Pairing Instructions for Bluetooth
®
Connection to Windows
®
7