Code CR2300 Bluetooth Connection - Manual (Page 4)

4
D020625_02 Bluetooth Connection Integration Guide
1. To re-establish connection to another host device already paired with
the reader, scan the following barcode:
Switch Host Device
2. The Code CR2600 will appear in the list of devices in the Bluetooth
menu on your device. Select the reader to initiate connection.
Note: If the Code CR2300/CR2600/CR3600 battery has been removed,
the reader is out of range, or is powered off while in default connection
settings, the reader will initiate connection to the most recent host device
when powered back on.
To clear reader connection from all Bluetooth devices, scan the
following barcode:
Clear Bluetooth Connection
Note: To re-establish connection once connection history has been cleared,
repeat steps 1-8 of Initial Pairing Instructions.
3.0 - Reconnect to Other Bluetooth ® Devices
4.0 - Clear Connection History