CITIZEN E670 - Manual (Page 18)

37 36
Pull the crown out to Position 1 and turn
to align the mode hand to [L-TM] (local
time).
(1) Pull the crown out to Position 2
(local time correction position).
· The second hand turns continuously
and stops at the daylight savings time
ON or OFF position.
(2) Turn the crown to set the hour and
minute hands to the local time.
A Turning the crown to the right (by 1 click) causes the hour and minute hands and
the 24 hour hand to advance by 1 hour.
B Turning the crown to the left (by 1 click) causes the hour and minute hands and 24
hour hand to go back by 1 hour.
· Turning the crown continuously (rapidly by 2 clicks or more) causes the hour and
minute hands and the 24 hour hand to move continuously.
· Turn the crown to the left or right to interrupt continuous movement of the hands.
· The date and day also change corresponding to the calendar and local time.
60
120
100
90
140
180
70
75
80
250
TAC
HY
M ET
E R
RX
L
M
H
OFF
ON
NO
RADIO CONTROLLED
Mode switching
position
Local time correction
position
Mode hand
Button (A)
Daylight savings time
ON/OFF position
8. Setting Local Time and Daylight Savings
Time
· The local time function lets you set the watch to a time in a different area from the
time set in the time mode [TME].
· The time difference can be made in 1 hour units.
· The local time can be set over a range of ±26 hours based on the time mode [TME].
· Daylight savings time can also be set. The time in this case can be set over a range of
-25 to +27 hours.
[Note] The times cannot be set beyond the above ranges. In addition, daylight
savings time must be switched on and off manually. It cannot be switched
automatically by receiving radio waves.