Directed Electronics 20.7 - Manual (Page 33)

33 © 2008 Directed Electronics. All rights reserved.
Low Runtime Alert •
The remote reports with one short beep followed by 1 short error tone
(repeated twice) and the text area displays "run time" when the remote start
runtime is at the 3-minutes remaining. The remote beeps one more time
when 1 minute is remaining. You have the option to let the remote start time
out, or use the “runtime reset” feature . When programmed “Off” you will
not receive a low runtime alert on the remote.
Car 2 On or Off/ Home •
Turns Off or On, the 2 car operation from the remote. The "Home" option
is not available.
Backlight Color Off/1 - 8 •
Turn Off the LCD backlighting or change the color of the backlighting.
Color options include: Blue, green, red, aqua, purple, lime, clear
Temperature Units F and C •
Display temperature in Fahrenheit or Celsius
Button Press Beep On or Off •
Turn Off beeps when a button on the remote is pressed
System Type Remote Start & Security or Remote Start •
Select the type of system you are using, security system with remote start
or a keyless entry system with remote start (to ensure that the correct icons
are displayed on the LCD)
Clock Set •
To enter clock set mode, Press the
A U X
button. The LC text display reads
"hour" to confirm entry in the clock set menu.
Press the
AUX
button to move up the menu, press the
AUX
button to move
down the menu.
After you select the time increment (hour/min), press
A U X
. The hour or minute
flashes. Press the
AUX
button to move up to the hour or minute, and press
the
AUX
button to move down to the hour or minute you want to set.
Once the desired time has been reached you can either choose "back" in
the menu or press
A U X
or
A U X
to save and exit.