Multi-car control capability, Button. to scroll between car – Directed Electronics 20.7 User Manual

Page 12

➤

Multi-car control capability

You can use the Responder LC 2-way remote control system for two cars, with

full command capability for both vehicles.

To change the car to be operated:

Press/hold the

A U

button for 3 seconds or until the remote beeps. The

car

ALL

flashes. The LC text area displays the current vehicle

selected.

Change Car: While in car selection mode, press and release the

A U

button. to scroll between car

ALL

and

ALL

. The car icon flashes to to

indicate the car that can be operated.

Select the car number you want to operate, and then press any command

button to operate the system. The selected car remains selected until the

setting is changed.

One-way remote

Press and hold the

A U

button until the amber light blinks once or twice

indicating the current vehicle (one blink = car 1, two blinks = car 2).

To scroll from one to the other press the

A U

button again.

When using the remote to control the system, the amber light will flash in a

sequence of 1 or 2 flashes indicating the current vehicle mode.