Directed Electronics 20.7 - Manual (Page 28)

28 © 2008 Directed Electronics. All rights reserved.
The Smart Start function works similar to the Timer mode. The system must be
in the locked mode. Using the system default settings, it has a maximum of 6
starting cycles ,and checks the voltage/cabin temperature every 3 hours to see
if the thresholds have been met.
If thresholds have been met then the remote start will start the vehicle and run for
the pre programmed time. It counts the first start as one successful start, leaving
5 start cycles.
If the threshold has not been met then the system will not start the vehicle, and 6
start cycles are left. The unit continues to check threshold levels every 3 hours.